In some occasions, the terms fake grass/turf or synthetic turf/grass are used to refer to artificial turf. The manufacture of the product occurs in a factory setting prior to its transportation to the place it is intended to be used. Generally, it finds a lot of use where the maintenance of natural grass is a problem. In addition to this, it is also used where it is impossible or undesirable for grass maintenance. Here are facts regarding Florida artificial turf.
This product is very tough, which allows it to withstand a high level of frequent use without undergoing significant degradation. This is a quality that has allowed the product to find a lot of use in sports arenas and stadiums. It has grown a lot in popularity allowing for its use in other spaces such as playgrounds, golf courses, and private lawns.
These products have a very long history. The introduction of the product occurred in early 1960s. The introduction was done by a company called Chemstrand Company, which later renamed to Monsanto Textiles Company. Fake grass is produced using the same method as carpets. However, fake turfs are meant to be tougher and longer lasting than carpets.
Materials and methods used in earlier products were inferior. This has been improved upon over the years. Today, these products are manufactured using high-tech methods and materials. Modern extensive use to which these products are put to requires that they be made tough. These products exist in different grades, which one can choose from based on what their needs are.
The materials used in production are usually treated with chemicals to make them resistant to damage that is often caused by exposure to ultraviolet rays for a long time. The materials have also been improved so that they can be withstand wear and tear caused by friction. The materials are also less abrasive, which means that they do not cause injury to athletes like earlier versions used to.
Same way rugs and carpets do, fake grass comes with a backing and a feathery upper part comprising the blades. The material used in manufacture of backings of carpets is similar to the material used to make backings on these products. In the manufacture of low quality products, some of the materials employed include plastic, polyester, and jute. In comparison to this, the use of polyester tire cord happen in making backings in high-quality products.
Nylon, polypropylene are some of the materials that are used to make the blades of these products. Nylon blades can be made using two different methods. The first method entails making the blades in the form of thin sheets that are then cut to make strips. The second method involves extruding the blades into molds that have round or oval cross-sections. The second method usually produce blades that appear more like natural grass as compared to the first method.
The product is rolled similar to make transportation easier just like in real turf. Prior to installation, adequate preparation should be done on the surface first. One is advised to hire a service company for the preparation and installation on areas that are large.
This product is very tough, which allows it to withstand a high level of frequent use without undergoing significant degradation. This is a quality that has allowed the product to find a lot of use in sports arenas and stadiums. It has grown a lot in popularity allowing for its use in other spaces such as playgrounds, golf courses, and private lawns.
These products have a very long history. The introduction of the product occurred in early 1960s. The introduction was done by a company called Chemstrand Company, which later renamed to Monsanto Textiles Company. Fake grass is produced using the same method as carpets. However, fake turfs are meant to be tougher and longer lasting than carpets.
Materials and methods used in earlier products were inferior. This has been improved upon over the years. Today, these products are manufactured using high-tech methods and materials. Modern extensive use to which these products are put to requires that they be made tough. These products exist in different grades, which one can choose from based on what their needs are.
The materials used in production are usually treated with chemicals to make them resistant to damage that is often caused by exposure to ultraviolet rays for a long time. The materials have also been improved so that they can be withstand wear and tear caused by friction. The materials are also less abrasive, which means that they do not cause injury to athletes like earlier versions used to.
Same way rugs and carpets do, fake grass comes with a backing and a feathery upper part comprising the blades. The material used in manufacture of backings of carpets is similar to the material used to make backings on these products. In the manufacture of low quality products, some of the materials employed include plastic, polyester, and jute. In comparison to this, the use of polyester tire cord happen in making backings in high-quality products.
Nylon, polypropylene are some of the materials that are used to make the blades of these products. Nylon blades can be made using two different methods. The first method entails making the blades in the form of thin sheets that are then cut to make strips. The second method involves extruding the blades into molds that have round or oval cross-sections. The second method usually produce blades that appear more like natural grass as compared to the first method.
The product is rolled similar to make transportation easier just like in real turf. Prior to installation, adequate preparation should be done on the surface first. One is advised to hire a service company for the preparation and installation on areas that are large.
About the Author:
Get a summary of the things to consider before picking a Florida artificial turf installer and more information about an experienced installer at http://www.ecogreengardencenter.com/artificial-grass.html now.
No comments:
Post a Comment