When you are trying to create a beautiful landscape that includes sidewalks, flower gardens, and other others, you need to have a material in place that will keep weeds from growing and create a great border. There are two basic types available and those include composite and plastic bender board. One lasts longer than the other but both are great for the job.
Composite borders are made from wood fibers. They're still flexible enough to use and often are brown or tan to match the color of the soil. The nice thing about them is that they break down and join the soil over time. If you want something that will last a lot longer than a few years, you should use the plastic version. Either works well and your personal preference will be used to make the decision.
The plastic one is made from recycled plastics. This helps keep it environmentally sound because new material is not made for this. Instead, it is made in a similar fashion as the composite, but using plastic composite materials that won't break down. This one will last much longer and won't have to be replaced.
There is not much difference in how you install them. Measuring how much you need takes a bit of ingenuity. Put a stake in the ground at every turn and use a string to measure how much you need. If you want, add a little material length since you can easily cut off what you don't need.
When you have your shovel ready and you've marked where the border will go, start digging. The trench you dig needs to be at least six inches wide to hold the border and deep enough that it will sit below the turf line. Put in stakes on the side that is away from the turf to be able to hold the material in place. Later, when you're putting the material down, you'll need to add a stake every spot that has a break in the material to hold both ends together.
Start putting the board into the trench. When you reach an end and need to add a second one, go ahead and place a second stake to be able to hold both ends together. If you need to cut the material for it to fit, now is the time to do so. If an area is riding high and will be above the trench, grab the shovel and dig out a bit more dirt to allow it to settle below the line.
Push the dirt into the hole. The whole reason for keeping the dirt nearby is to make it easy to fill it back in. You'll have more than you need but you want to pack it down. It will settle over time, so don't worry too much if it creates a bit of a mound. Use your feet or a tamping tool to pack it in nice and tight.
Creating a nice border is super easy using either type of material. This will keep weeds from growing up after you've placed nice decorative border rocks around the flower garden or other landscaping.
Composite borders are made from wood fibers. They're still flexible enough to use and often are brown or tan to match the color of the soil. The nice thing about them is that they break down and join the soil over time. If you want something that will last a lot longer than a few years, you should use the plastic version. Either works well and your personal preference will be used to make the decision.
The plastic one is made from recycled plastics. This helps keep it environmentally sound because new material is not made for this. Instead, it is made in a similar fashion as the composite, but using plastic composite materials that won't break down. This one will last much longer and won't have to be replaced.
There is not much difference in how you install them. Measuring how much you need takes a bit of ingenuity. Put a stake in the ground at every turn and use a string to measure how much you need. If you want, add a little material length since you can easily cut off what you don't need.
When you have your shovel ready and you've marked where the border will go, start digging. The trench you dig needs to be at least six inches wide to hold the border and deep enough that it will sit below the turf line. Put in stakes on the side that is away from the turf to be able to hold the material in place. Later, when you're putting the material down, you'll need to add a stake every spot that has a break in the material to hold both ends together.
Start putting the board into the trench. When you reach an end and need to add a second one, go ahead and place a second stake to be able to hold both ends together. If you need to cut the material for it to fit, now is the time to do so. If an area is riding high and will be above the trench, grab the shovel and dig out a bit more dirt to allow it to settle below the line.
Push the dirt into the hole. The whole reason for keeping the dirt nearby is to make it easy to fill it back in. You'll have more than you need but you want to pack it down. It will settle over time, so don't worry too much if it creates a bit of a mound. Use your feet or a tamping tool to pack it in nice and tight.
Creating a nice border is super easy using either type of material. This will keep weeds from growing up after you've placed nice decorative border rocks around the flower garden or other landscaping.
About the Author:
Get great tips for choosing a plastic bender board supplier and more info about a reputable supplier at http://www.bestedging.com right now.
No comments:
Post a Comment