When a tree is cut down, what remains is usually referred to as a stump. Cutting down a tree is much easier than removing a stump. It is for this reason stumps are not usually removed after a tree has been cut down. On the other hand, stumps need to be removed since they can be a hazard. When the right tools and the correct procedure is followed stumps can be easily removed. For the best Stump Grinding Western WI needs to be visited.
Stumps need to be removed since they occupy a lot of space that can otherwise be used productively. They also make a place to be less visually appealing. For instance, it is a very bad sight to imagine a compound filled with stumps after several trees have been fell.
Removing a stump has some considerations that must be kept in mind before the job is done. Usually, older tree stumps are easier to remove than fresh ones. Deciduous trees are also more difficult to remove because their roots grow much deeper into the ground. The method to be used to remove the stab highly depends on how big the stab is.
Stumps can be removed by using mechanical tools such as chainsaws, grinders, rakes and shovels. A grinder is used to grind the wood away completely or to a specified size. A shovel and a rake are used to clear off unwanted material around the stump. Places that cannot be accessed using a grinder are cut using a chainsaw. Grinders tend to throw off a lot of wooden chips when grinding, which makes it important to keep eyes protected.
There are other tools that can be used to remove a stab apart from a grinder. Grinders are usually effective when removing small stumps. A chainsaw is used to cut the upper part of the stab while a shovel is used to dig soil around the stump in order for the roots to be accessed. An axe is then used to cut the roots until it becomes weak. Once weakened, a chain can be tied around the stub and a truck used to pull it out.
Another way of stab removal is by use of chemicals. Before using drills to drill holes into the stab, the upper part is removed using a chainsaw. The location of the holes should be on the sides and the top of the stump. Potassium nitrate is then poured into the holes. A period of around six weeks is given to the stumps for them to be spongy and removable by use of an axe.
One can also use fuel or kerosene to remove the stump. When using this method, holes should be drilled into the stab then filled with fuel. It is then set on fire and left to burn for a week. This will make the wood burn completely leaving white ash behind.
When using a grinder or burning it is easier to get rid of the ash and wood chip[s resulting from the process. It is difficult to get rid of a stump once it is removed while still intact. The benefits of hiring a service provider is that they usually carry the stab once they have removed it.
Stumps need to be removed since they occupy a lot of space that can otherwise be used productively. They also make a place to be less visually appealing. For instance, it is a very bad sight to imagine a compound filled with stumps after several trees have been fell.
Removing a stump has some considerations that must be kept in mind before the job is done. Usually, older tree stumps are easier to remove than fresh ones. Deciduous trees are also more difficult to remove because their roots grow much deeper into the ground. The method to be used to remove the stab highly depends on how big the stab is.
Stumps can be removed by using mechanical tools such as chainsaws, grinders, rakes and shovels. A grinder is used to grind the wood away completely or to a specified size. A shovel and a rake are used to clear off unwanted material around the stump. Places that cannot be accessed using a grinder are cut using a chainsaw. Grinders tend to throw off a lot of wooden chips when grinding, which makes it important to keep eyes protected.
There are other tools that can be used to remove a stab apart from a grinder. Grinders are usually effective when removing small stumps. A chainsaw is used to cut the upper part of the stab while a shovel is used to dig soil around the stump in order for the roots to be accessed. An axe is then used to cut the roots until it becomes weak. Once weakened, a chain can be tied around the stub and a truck used to pull it out.
Another way of stab removal is by use of chemicals. Before using drills to drill holes into the stab, the upper part is removed using a chainsaw. The location of the holes should be on the sides and the top of the stump. Potassium nitrate is then poured into the holes. A period of around six weeks is given to the stumps for them to be spongy and removable by use of an axe.
One can also use fuel or kerosene to remove the stump. When using this method, holes should be drilled into the stab then filled with fuel. It is then set on fire and left to burn for a week. This will make the wood burn completely leaving white ash behind.
When using a grinder or burning it is easier to get rid of the ash and wood chip[s resulting from the process. It is difficult to get rid of a stump once it is removed while still intact. The benefits of hiring a service provider is that they usually carry the stab once they have removed it.
About the Author:
You can find an overview of the benefits you get when you use professional stump grinding Western WI services at http://www.nrtree.com right now.
No comments:
Post a Comment