The marking of parking lots is very necessary since it helps in directing drivers to the designated spaces where they are supposed to pack their vehicles. Stripping of parking lots is normally done in parking spaces for schools, businesses, hospitals, and other organizations. Also, public parking spaces are normally marked appropriately as per the laws within the jurisdiction. Certain factors need to be observed in order to mark lots correctly. When in search of specialists in parking lot marking Arkansas should be given priority.
Firstly, one is required to have knowledge on the nature of the laws that exist within their jurisdiction. These laws determine a variety of aspects like the dimension of parking lots, accessibility of the facility, width of the marking lines, and paint color among many others. A standard stall should be 18 feet long and 9 feet wide although the measurements may vary based on the jurisdiction under consideration.
Lots normally contain aisles which allow drivers to have easy access to stalls. These aisles offer drivers enough space for maneuvering around the lot and backing out from their parking spots. Two-way drive aisle is supposed to have a minimum width of 24 feet. On the contrary, the width of a two way-drive aisle is supposed to be 12 feet. These are the standard measurements of stalls that are placed at a certain angle. The aisle width should increase with increase in the angle of the stalls towards 90 degrees.
According to the US federal standards, the standard color for marking lots is white. For demarcating the locations which are unavailable for parking, the yellow color should be used. These consist of painted islands, which are situated at the ends of lots. The blue color is used to mark handicapped-accessible spaces. Lastly the red color is used in demarcating fire lines where individuals are banned from parking their vehicles.
There are two major reasons as to why stripping is done and they are safety and aesthetics. Aesthetics are achieved by using colorful colors in a meticulous manner to mark pavements. Safety is assured as well since drivers are directed by the markings, which helps to reduce accidents. The markings also make sure that space is utilized in an economical way.
When one is applying paint on concrete substrates, the best choice of paint to use is chlorinated rubber paint for the best adherence. On the other hand, fresh sealer or asphalt requires water-borne coating. Re-stripping can be done using various kinds of paint, but set-quick acrylic waterborne paints are the best choice. Acrylic paints should be applied at 45 degrees F.
So as to obtain better results, airless stripping machine has to be used. Thickness of these markings should be 13 mm. There is a possibility of the surface being soaked with paint, leading to thinner application at the end. It takes approximately thirty minutes for the paint to completely dry and make the lot to be ready for use.
It is better to apply two thin coats of paint instead of a single thick coat. The marks should be re-stripped if their visibility reduces to 75 percent. One should use the appropriate material when re-stripping to attain proper visibility.
Firstly, one is required to have knowledge on the nature of the laws that exist within their jurisdiction. These laws determine a variety of aspects like the dimension of parking lots, accessibility of the facility, width of the marking lines, and paint color among many others. A standard stall should be 18 feet long and 9 feet wide although the measurements may vary based on the jurisdiction under consideration.
Lots normally contain aisles which allow drivers to have easy access to stalls. These aisles offer drivers enough space for maneuvering around the lot and backing out from their parking spots. Two-way drive aisle is supposed to have a minimum width of 24 feet. On the contrary, the width of a two way-drive aisle is supposed to be 12 feet. These are the standard measurements of stalls that are placed at a certain angle. The aisle width should increase with increase in the angle of the stalls towards 90 degrees.
According to the US federal standards, the standard color for marking lots is white. For demarcating the locations which are unavailable for parking, the yellow color should be used. These consist of painted islands, which are situated at the ends of lots. The blue color is used to mark handicapped-accessible spaces. Lastly the red color is used in demarcating fire lines where individuals are banned from parking their vehicles.
There are two major reasons as to why stripping is done and they are safety and aesthetics. Aesthetics are achieved by using colorful colors in a meticulous manner to mark pavements. Safety is assured as well since drivers are directed by the markings, which helps to reduce accidents. The markings also make sure that space is utilized in an economical way.
When one is applying paint on concrete substrates, the best choice of paint to use is chlorinated rubber paint for the best adherence. On the other hand, fresh sealer or asphalt requires water-borne coating. Re-stripping can be done using various kinds of paint, but set-quick acrylic waterborne paints are the best choice. Acrylic paints should be applied at 45 degrees F.
So as to obtain better results, airless stripping machine has to be used. Thickness of these markings should be 13 mm. There is a possibility of the surface being soaked with paint, leading to thinner application at the end. It takes approximately thirty minutes for the paint to completely dry and make the lot to be ready for use.
It is better to apply two thin coats of paint instead of a single thick coat. The marks should be re-stripped if their visibility reduces to 75 percent. One should use the appropriate material when re-stripping to attain proper visibility.
About the Author:
You can find a summary of the advantages you get when you use professional parking lot marking Arkansas services at http://www.arrowstriping-nwa.com today.
No comments:
Post a Comment